|
|---|
 |
 |
 |
 |
 |
 |
 |
 |
| Supplier Login Client Login |
|---|
| Coatings | ||||||
| POWDER COATING | ||||||
| DESCRIPTION | ||||||
| Powder Coating is an advanced method of applying decorative and protective finishes to a wide range of materials and products. The powder used for the process is a mixture of finely ground pigment and plastics. This mixture is sprayed onto the surface being coated, where it adheres electro-statically until heated and fused into a uniform coating in a curing oven. The result is a durable, high quality and attractive finish | ||||||
| >>Top of Page<< | ||||||
| SPECIFICATIONS | ||||||
| Gloss - ASTM D-523-60 deg 50% to 60% gloss Pencil Hardness - ASTM D-3363-2H minimum Impact Resistance - ASTM D-2794-160 inch lbs. forward/reverse Flexibility - ASTM D-522-180 deg bend over 1/4" mandrel Adhesion - ASTM D-3359B no lifting of coating Salt Spray Resistance - ASTM B-117-1000 hrs. in 5% solution at 95ºF and 95% relative humidity produces no blistering and less than 1/16" undercutting from scribe Humidity Resistance - ASTM D-2247-100% relative humidity at 100F for 1000 hours-no effect Weatherability - ASTM D-822-1 year south Florida exposure at 45º angle 91% of gloss retention |
||||||
| >>Top of Page<< | ||||||
| ELECTROCOATING ( E COAT) | ||||||
| DESCRIPTION | ||||||
E-coat provides an excellent base for a variety of topcoats. It provides an incredible "dual application advantage," creating a more decorative and durable finish. E Coat provides the technology, leadership and ability to do both processes in-house, serving a broad spectrum of industries and specifications. Substrates E-coated - Cold Rolled/Hot Rolled Steel, Galvanized Steel, Iron Castings, Zinc Castings, Copper/Brass, Conductive Composites, Aluminum Extrusions and Castings, Plated Steel, Stainless Steel, Magnesium, Chrome Plate. Electrocoating readily conforms to complex configurations and yet maintains engineered tolerances on parts ensuring intended operating functions. Some examples include - Internal Surfaces, Deep Recesses, Weldments, Fasteners, Small Parts, Large Parts, Uniform Coating- No Sags or Runs. | ||||||
| >>Top of Page<< | ||||||
SPECIFICATIONS / STANDARDS |
||||||
|
||||||
| >>Top of Page<< | ||||||